How to maintain the outboard engine? How to maintain the outboard machine?

The outboard machine has been used for a long time and many times. In order to ensure the performance of the outboard machine, the outboard machine must be regularly maintained and maintained in the process of use. Then how to maintain the outboard machine? How to maintain the outboard engine?

1, replace the gear oil

After 10 hours to change gear oil in the first run, after every 100 hours or replaced every 6 months, or gear will wear quickly, tilt outboard machine, make the gear oil discharge screw located in the low, as far as possible in the underwater device into a suitable container, remove the gear oil drain screw, remove the oil plug, emptying of gear oil, Use a pressure charging device to fill the gear oil into the drain screw hole. When the gear oil starts to flow out of the oil level plug hole, insert and tighten the oil level plug.

2. Check the propeller

Maintenance and maintenance of the outboard machine, propeller is also to check the parts, check whether each blade of the propeller is worn, eddy current or exhaust erosion or other damage, propeller shaft is not damaged, split pin is not worn or damaged, propeller shaft whether there is fishing line winding, propeller shaft oil seal is damaged.

3. Add lubricating oil

Before leaving the factory, the parts that need lubrication have been injected or smeared with lubricating grease. After 50 hours of use, the user needs to inject or smeared with lubricating grease on these parts.

4. Check and replace the anode

Check the external anode regularly, usually every six months, to clear the scale from the anode surface. Please consult the distributor for the replacement of the anode.

5. Clean and adjust the spark plug

Due to heat and sediment will cause spark plug fracture and corrosion, so should be removed on a regular basis and check the spark plug, use the spark plug inside the accessory kit, and check the spark plug electrode gap and the necessary clearance adjustment to the specified value, between the specified value is 0.6 mm, 0.7 mm, application models of the spark plug replacement right when necessary.

About how to maintain the ship, how to maintain the ship according to the above points.